🇺🇸【 Walrus Audio 】Slö Multi Texture Reverb
Walrus Audio 推出的一款 Reverb 效果器，讓您隨心所欲的製造出豐富而多變的美麗殘響，深受用家歡迎。
Slö 可藉由 mini switch 切換三種不同的殘響模式：
Dark (Lower Octave), Rise (Ambient Swell) and Dream (Latching Pad)
而 mini switch 的另一個功能就是切換 Reverb 聲響的波型，多變的可調性與長且豐富的 Reverb 聲響，Slö 的迷人之處就在於此。
📍 殘響說明：
■ Dark：為 Reverb 加上低了一個八度的聲音，能夠用於創造深沉而寬廣的氛圍，X旋鈕則控制低八度訊號的音量多寡。
■ Rise：若選擇 Rise 模式，Reverb 聲響會慢慢擺盪且爬升，聲音明亮、自然。
■ Dream：聲響極為豐富的一個模式，使用X旋鈕加入 Vibrato 的效果，並且當踩下 sustain 按鈕的時候，殘響會一直延續，直至再次踩下 sustain，殘響效果才會依 Decay 旋鈕設定的位置衰減。
・・・
The Slö Multi Texture Reverb allows players to create lush, modulated, sleepy and ambient soundscapes. Stocked with three different algorithms specifically designed to invoke textures for bringing dreams from your subconscious to reality.
The toggle switch allows three different reverb modes, Dark (Lower Octave), Rise (Ambient Swell) and Dream (Latching Pad), while secondary functions on the switch change between different wave shapes for the modulation on the reverb trail.
Combine deep modulation with long washy trails and experience, the Slö.
■ ALGORITHMIS:
• DARK – Add a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a -1 octave signal that feeds the reverb.
• RISE – This is an auto-swell reverb for beautiful cinematic swells. Don't rush it. Let it breathe and gently wake up. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for longer rise times.
• DREAM – Here is a lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and pad will decrescendo according to where decay knob is set. X knob sets the depth of vibrato applied to the reverb trail.
The Slö also features 3 different wave shapes accessible by holding down bypass while switching the algorithm toggle.
• SINE – Smooth and even pitch up and down modulation.
• WARP – Asymmetric pitch up modulation similar to a warped record.
• SINK – Asymmetric pitch down modulation for sinking detune similar to a Bigsby.
■ MOMENTARY FUNCTIONS:
Bypass: When the switch is in off position, press and hold to temporarily activate the effect to add a moment of reverb texture. Releasing the switch turns the effect off, and fades it out.
Sustain: When pressed, the decay switch ramps up the reverb trail to maximum creating long dreamy reverb trail and then ramps back down to the decay knob setting when released. In the “Dream” algorithm, the sustain switch is latching. Press it once to capture and sustain the current reverb decay for extremely long pad-like sounds. Press it again to let the reverb trail taper off, based on the position of the decay knob.
■ TRAILS MODE:
The Slö can run in trails or no trails mode. In trails mode, when you turn the pedal off, the reverb decay dies off naturally. In no trails mode, the decay is abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.
